Stainless Steel Wafer Metering Station



Position: HOME > PRODUCTS > Water & HVAC > Others > Stainless Steel Wafer Metering Station

Stainless Steel Wafer Metering Station

1.Tolerance on Nominal Kvs ±5% (test according to BS7350)

2.Working Conditions is water between -10°C to +130°C

3.For EN1092 PN16 Flanges

Tel: +86- 532- 55785171 / 55785172 / 55786571 / 55786572

E-mail: info@qdiflow.com

Description

Part List:

Part No.	Name	Material
1	Body	Stainless steel
2	Extension	Stainless steel
3	Test point	DZR Brass2

Specification

Dimensions:

DN	H(MM)	L(MM)	∅D(MM)	Peso(g)	Portate(I/S)
050	145	18	109	1142	1,52-3,511
065	154	18	127	1468	3,02-6,951
080	162	18	143	1762	6,40-15,361
100	172	18	163	1967	10,85-26,041
125	187	18	193	2560	16,85-39,751
150	200	18	219	2950	23,71-56,911
200	227	18	274	4140	41,86-100,471
250	255	18	330	5350	66,58-156,781
300	283	18	385	6830	94,16-255,991
350	313	21	445	11000	96-261
400	338	21	445	11000	117-320
450	368	21	556	17000	150-408
500	399	21	618	21000	185-506
600	458	25	735	35000	245-667

Flow Measurement:

测试法兰流量测量.png

Formula linking flow Q (in l/s) and Δp measured attest points (in kPa).

Minimum flow that can be measured for each diameter may be calculated by using in the formula minimum Δp that can be measured by used manometer.

K_vs*_△P^TP/36

Installation：

To obtain optimal performance, install the flow meter on a pipe with the same nominal diameter, preceding and following it with a section of straight pipe as indicated in the figure.

测试法兰安装.png